Hermoso.Crafts Home
mardi 8 september 2015
Reduce clutter and organize
To increase your productivity at home or at work. This is wonderful DIY
ideas are also incredibly cost effective. Most ideas take less
think of organizing yourself and getting away from the clutter
1. Stack of Mason Jars
Five ball mason jars with hot glue as shown together. Once dry tip
sides and pencils, pencils wide for the use of small cubes,
staples and other small items.
2. Binder clips for tangle free cables
Attach the binding clips to the edge of the table to hold the USB and other cables. Run through the metal part to avoid tangling the cables.
3. Jelly Jar Storage
Remove the desired shelf and place it upside down on the work surface. space
The caps are two inches from the other. Screw the cap, nails or hot glue
place. Return to the rack and screw into the jars.
4. Peg Board
Frame a perforated board and hang it on the table to store items. Perforated wooden can hold small items such as scissors and tape.
5. Reuse an Old Shutter
Use to receive pending or paid bills. Or for hardcover invoices, use the upper half as a box and the lower half.
6. Shoe Box Storage
Secure shoe boxes with clips to store light books and paper.
If you prefer to be more decorative, place the shoe boxes on the shelf.
lining or wrapping paper.
7. Re-Purpose Magazine Owners
Install new or used magazine holders in the rack to hold items. Paint or cover with shelf paper to match the room decor.
8. Reusable Wall Brackets
Re-fastened wall brackets make beautiful magazines, envelopes or paper holders. The sleek look will add a touch of class to your office to your home or office.
9. Make a Table
Turn the libraries and an old door into a beautiful table with plenty of storage space. Low libraries provide plenty of storage space to keep the table away from clutter.
10. Drawer Dividers
Covered Cereal Boxes
in shelf liner or wrapping paper,
table drawer. Use a full knife to trim the boxes to fit the drawer.
11. Hidden Table
Two hinged bookcases create a pleasant way to hide a table. The table top is designed to fold when the table is ready to close.
12. Hanging Storage Boxes
These hanging storage boxes are made of re-intended disinfecting wipes containers. Stand near or on your office workstation.
13. Re-Aim an Old Window
Old window
Take a new life as a storage space for your office. Hang reminders and
Use the chalkboard for family reminders. The project can be completed
one noon.
14. Mail Sorter
Create a mail sorter with canvas. The spines will really love this idea. There are four categories to store invoices or use as an input and output box.
15. Wine rack organizer
Purpose of re-use of wine rack
Become a nice organizer for your desk. Empty containers
stains holding wine. And use the above cabinet to store extra
16. A Chest Office
Give your chest a new life as a miniature office to store folders and more. The project is quick and easy. And all the office files and supplies are beautifully hidden.
17. Donut Tin Storage
Convert a drawer to finish and win in a drawer.
18. Convert a Wall
Create a giant strip wall. Stapling and desired fabric
wall. Use fabric nails to attach the strip. The converted wall will
Keep papers and much more.

I wanted to do a tutorial and finally decided on this little macrame bracelet. It is based on the knotted bracelets you see in tourist shops. It is very easy to do and you can design it to suit your style, depending on the beads and beads you choose. They also offer great gifts due to the adjustable length of the sliding buckle.

As long as the bead holes are large enough to accommodate two cords, almost any type of cords and cords work. Only one node is used along a simple square node. The sliding buckle is as simple as finishing, and the whole project can do what you want in part of American Idol or the TV.

You’ll need a few simple things:

  • 4 meter cable (I used C-Lon Tex 400 for this demo)
  • 8 or more beads depending on the length of the bracelet
  • 2 small beads for rockers
  • 3 straight pins
  • scissors
  • Needle tip for finishing needle (has round ballpoint tip)
  • Needle Tip Jewelry Pliers (Optional)

1)Cut the 2-piece strap up to 24,, hold it together and clip about 8 clipboard boards from one end. These will be fill cables. I use a shade of lavender for my stuffing cords.

Cut a piece of cord about 2 meters long. This knot will become ropes. Normally I use the same color cable for both fill and knot cords, but for this demo only, I use a dark purple shade for knot cords. Locate the center of the knot cord, slide it under the filler cables and secure it to the foamcore panel. We will now start to work with square knots with knot cords on the filler cables.

2) I use the right hand, so I usually start with the cable on the right side of the filler cables. Place the fill cords horizontally on the right to form a ring on the right. Take the cable on the left and place it on the horizontal cable, then lift it up under the cables and with the ring on the right. Pull out both knot cables and tighten. This is 1/2 of the square node.

3) Repeat step 2, but take the left cord and place it horizontally on the filler cables that form a loop on the left. Take the right cord and place it on the horizontal cord, then turn it under all the cables and top to left. Pull out both knot cables and tighten. You just made a full-frame knot.

4) After each 3 to 5 square knots, continue to make square knots and place a bead on the filler cables. The number of nodes depends on the size of the cord, the size of the beads, and the fact that many nodes look nice to you. Continue this pattern to the desired length. Note that the sliding clamp will add approximately ″ add.

When you’re done, thread a knot of thread into your needle and sew it to the center as far as possible. If you have problems, use a pair of jewelery pliers to pull your needle. If you find that your knots are too tight and you cannot thread the entire cord, remove the 3-ply cord and sew each thread separately. After properly sewing both knot cables, cut off any excess.

5) Then we make the buckle. Circle your work and hold it together by loosely tying it with a small amount of cord close to both sides of the nodes (I used orange). Foamcore pin bracelet.

Cut a strap about 12 ″ in length. Just like you did in step 1, slide this cord under the four cords and make square knots on all four cords for the 1/2 cord. Finish ends just like you would with a bracelet. When sewing these tips, avoid putting needles into the cords inserted into the needle.

6) Remove these temporary lanyard bits. There are 2 loose cables protruding from both ends of the buckle section. Hold 2 cords together and form a slip knot, place a bead on both cords, then create another slip knot to hold it in place. Cut the excess. Run and show everyone you know.