Pasta Technique

Pasta TechniqueMacrame Technique
You will need two 40 temel length and two 32 temel length basic cables and 4 working cables.
Fold the working cords in half and attach them to the foundation cord with a suture stitch so that the long cords are at the edges and the short cords are in the middle. One side of the cable is 20 ”, the other side is 12”; 12 ”length cords should be placed in the center.
Mentally mark all cables with numbers from 1 to 8, from left to right.
Main pattern:
Step 1. Take the cords 3, 4, 5 and 6. and make a square knot or double half knot knot. Cords 4 and 5 should remain in the middle, cords 3 and 4 should be set aside. It is more convenient to fix the cords set aside with the pin on a soft padding, for example on a cushion.
Step 2. Take the 2nd, 4th, 5th, 7th cord and place the second pair of half-clunky knots from the right under the first. Set the 2nd and 3rd cords aside and straighten; Cords 4 and 5 should be in the same center as in the first node.
Step 3. Cords 1, 4, 5 and 8 are woven in the same square knot. Set the 8th cord aside; 4t, 5tfons still remain in the center.
All three nodes were touched beneath each other.
Step 4. Leave a ½ ”clearance and mentally mark the cables 1 to 8 from left to right. Then repeat the first three steps.
Step 5. It is necessary to tighten all nodes and bring the second group of nodes closer to the first one. Now there are rings from the cords we have previously set aside.
Step 6. Continue repeating steps 1-5 until you get the desired length.
A pattern of Japanese nodes
You will need a basic cable and 2 ”thick 2 thickness and embossing cord.
Fold the cables in half and attach them to the base cable with a sewing seam.
Step 1. Knit a square knot.
Step 2. Make a nozzle from cables 1 and 4, and then fix them on a soft cushion, for example on a cushion or behind a soft chair with pins.
Step 3. Take cords 2 and 3. Loop around cord 2 with cord 2. You must also take the cord 3 and contour the ring ring with a free ring.
Step 4. Then weave the Herculean knot from the cables. Tighten the knot.
Step 5. Repeat step three.
Step 6. Lower cables 2 and 3 towards the center, and then make a Herculean knot with cords 1 and 4 around them.
Step 7. Until the length of the garment is required 2-6. Repeat the steps.
Hercule knot weaving technique: place the right cord on the left and discard the other; then pull the right cord from the bottom up with your left hand. Then place the left cord on the right, throw it on the other, and pull the left cord from the bottom up.
Beaded simple pattern
A very simple pattern embellished with beads will add a special style to your work.
You will need the basic cable, 2 main cables of 24 ”length and the beads you want. Make sure that the thickness of the bead fits into the bead holes and that the bead can pass easily.
Fold the working cables in half and attach them to the foundation cable using a basic seam.
Bringing macromeles of the 20th century here and now

I have to admit that until recently, the list of things I want to hang on my macrame walls will be at the end – when I grew up, it brought back memories of the moldy brown pieces I found in dozens of thrift stores. A particular macrame find – an owl made of twine – comes to mind. However, if you take the time to them, as proof that the flavors and trends have become a complete cycle (I’m betting the owl gets a nice penny in some old vintage boutiques right now) I’ve found myself with pleasure recently (not like that) Art.

Finally my example – my friend Jess recently bought the most beautiful wall hanging in Etsy (as you can see below) and it is full of neons to add a modern cool touch. After seeing this, I was desperate to know more about how these pieces were created – and I was very happy when Himo Art May agreed to stop running out. May did a great job of bringing the macro of the 20th century here and now (the last macromeles became perfect for me), and I was delighted that she decided to look at it – it turned out to be quite complicated – the process. It’s time to Improve your knotting skills, kids!

Things that you need:

  • Rope
  • Wooden Dowel
  • Wooden Breads
  • Paint Brush
  • Scissors
  • Masking Tape
  • Paint



It can attach dowels to the wall – it uses a removable hook, because it’s a great way to not make holes in the wall.


It can cut the rope into 14 x 4 yard pieces and 2 x 5 yard pieces. It then begins tying the rope to the head nodes of the larvae and compiling the dowel with 5 yard pieces (one at each end) into a book.


The rest can continue with ropes.


Then it makes double half axle knot.


And it goes on and on.


By the end, May begins tying them diagonally across the ropes.


You can add wooden beads here and here before connecting the nodes.


Then each starts to connect the switch nodes using 4 ropes.


Can connect 8 of them.


It then adds the node (as before) to the double half node.


And he brings them crosswise.


You can add more beads and bring the knots to the end.


It can then cut the ends of the rope.


Covers a portion of the dowel ends to paint and add a hint of neon (a woman from my own heart!)


Finally, he adds a watermelon pop to the end of the rope.


And there, hung a magnificent macrame wall. I can appreciate the work that goes into these pieces – not a craft for withered or ham!